These user friendly products can be placed during new pipe installation or retro-fitted around previous projects.  Made of durable High Density Polyethylene, Scheib Anti-Seep Collars are pre-cut and drilled with stainless steel bolts and bands.

Scheib Anti-Seep Collars are constructed in 4’ x 4’, 5’ x 5’ and 6’ x 6’ sizes and they can be used with corrugated plastic, PVC, CMP and Steel pipes. Options are available for pipe sized from 2” all the way up to 48” O.D.     

Freight costs are included for shipping within the 48 contiguous states.

See all the possibilities by clicking the link below:

Construction material containment is an EPA requirement per the Federal Clean Water Act. Concrete slurry contains contaminants resulting in pH levels so hazardous that they’re comparable to liquid Drano.  Do your part to keep our ground water clean and avoid fines with Outpak Washouts from Drainage Solutions, Inc.

These products by Outpak are the original disposable washout designed to be EPA & BMP compliant.  They can provide immediate cleanup for concrete, paint, and other projects. Portable, disposable washouts from Outpak are designed to comply with DOT regulations & they assist in LEED approval.  They’re available in materials and sizes appropriate for use with mixers, concrete pump trucks or wheelbarrows and they can be used on large or small construction sites.

Learn more about these products, their sizing, and proper uses here: 

Outpak Washouts are stocked at all our Indiana stores and online at:

“Marsh Mat” is a Storm Inlet Filter Pad designed to help stop sediment and debris OUTSIDE the grate. This Inlet Filter is an economical green BMP for construction-phase compliance with NPDES II. It’s available from Drainage Solutions, Inc. in pre-cut pads/mats or rolls to allow quick installation on any size or shaped grate.

To Install, cut the mat to allow 3” overlap at each side of the grate. Attach the mat to the topside of the inlet grate using cable ties.

SPECIFICATIONS:

FILTERING EFFICIENCY 59.1%
FLOW RATE 150 liters/minute
ASTM D 5141 with No. 10 sand

MARSH MAT IS IN STOCK AT OUR FOUR INDIANA STORES IN BOTH PRE-CUT MATS AND COIR ROLLS!

You can also get them on our web store by clicking the button below: