close
close
click to zoom in

12" x 18" MarMac MacWrap RCP Coupler (RCP to RCP)

No reviews yet Write a Review
$97.52
SKU:
MM-MWRAP1218RCP
Availability:
Usually Ships in 7-10 Business Days

12" x 18" MarMac MacWrap RCP Coupler (RCP to RCP)

$97.52

12" x 18" MarMac MacWrap RCP Coupler (RCP to RCP)

$97.52

MarMac MacWrap is a highly-advanced, external joint coupler designed to permanently prevent infiltration at precast concrete structure connections, including reinforced concrete pipe (RCP), manhole sections, box culverts & stormwater retention systems, and many other round or elliptical concrete structures.

External seals for reinforced concrete pipe joints

MacWrap for RCP (Reinforced Concrete Pipe) is a high performance, external joint coupler designed for the prevention of infiltration and resistance of exfiltration at joints of bell-and-spigot, tongue-and-groove, round, or elliptical RCP.

MacWrap’s specially formulated mastic is designed to aggressively adhere to the exterior concrete pipe surface, with the tightened mechanical straps creating a nearly indestructible seal. MacWrap for RCP  is permanent, immediately inspectable, and boasts a 100% success rate. Simply put, MarMac MacWrap is the best there is.

MacWrap Couplers integrate several unique components into a single, customizable, full-perimeter, external sealing band. Our specially-formulated mastic provides a positive seal against infiltration. The coupling membrane is reinforced by internalized woven polypropylene with a heavy duty polyethylene backing and secured by high-tensile compression bands with tensioning ratchets.
  • Size: 12" x 18" ID  19.5" OD  
  • Strong, permanent, shear & puncture resistant
  • Specially-formulated mastic layer
  • Easily installed & immediately inspectable
  • Full-perimeter, positive seal = infiltration-proof
  • Heavy-duty, high-quality design
  • Protection from corrosion, acids & alkali by using a MacWrap CR (Chemical Resistant)

***SPECIAL ORDER*** 

***Non-cancellable and non-returnable***

Available in sizes 12" - 144" Round & Elliptical

Other MacWrap versions available:

  • MacWrap for Manholes
  • MacWrap for Box Culverts
  • MacWrap Chem-Resistant
  • MacWrap Repair Coupler

SPECIFICATION

MacWrap integrates several unique components into a single, full-perimeter, external sealing band. The coupler composition consists of:

  • Heavy duty polyethylene backing
  • Internal woven polypropylene reinforcement
  • High-tensile compression bands
  • Specially formulated mastic contact layer

INSTALLATION

Surface preparations: Inspect the outside of the joint. Brush and/or repair surface as needed to ensure there are no loose materials or voids. If installing on horizontal pipe, dig the bell hole for complete access to the joint.

The coupler shall be placed around the pipe, mastic side centered on the pipe joint, and then the protective release film shall be removed. The straps will then be tensioned and secured with preinstalled ratchet tensioners. The closing flap shall cover the service area and exposed straps, completing the installation. Backfill may commence immediately following the inspection of proper sealing band installation.

CAUTION: *All statements and technical information are based on tests and/or data which MarMac Manufacturing deems reliable, however, MarMac does not warrant or guarantee the accuracy or completeness of such information. Please read further manufacturer liability and warranty information.