Fernco Chemical Couplings provide a flexible and watertight connection on drainage systems that require a high chemical resistance to a wide range of chemicals. Manufactured to meet specific site requirements, Fernco Chemical Couplings withstand the widest possible range of chemicals, due to the shear band and clamping bands encasing a high-performance elastomeric sleeve with a chemically resistant one-piece Fluoropolymer (FEP) liner and PTFE seals.
FEATURES
PL: Plastic / CI: Cast Iron / GL: Glass
Pipe Size: 2"
Min./Max pipe OD: 2.13" - 2.60"
Transitions dissimilar chemical piping and sizes
Chemical resistant drain system, connects chemical waste piping to chemical waste tanks
One piece Fluoropolymer liner
Suitable for above and below ground use
Max temp: 212°F (consistent), 266° F (intermittent)
Minimum temperature -50°F
4.3 PSI maximum test pressure
APPLICATIONS
Connects chemically resistant DWV pipe and fittings
Connects drain pipe for: chemistry labs, research labs, beverage plants, commercial kitchens, printing, as well as medical, pharmaceutical, pulp, film and chemical facilities
Custom sizes available upon request
INSTALLATION INSTRUCTIONS
Champfer and deburr both pipe ends.
Mark the pipes adjacent to the coupling bands.
Apply Ten (10) layers of PTFE tape directly over the lines on the pipe.
Center the FEP liner over the pipe ends and PTFE tape.
Use a heat gun to shrink the FEP liner to the pipe.