Block Dies

2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

1 1/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1 1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

3/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

3/8" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/4" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...