Weld-On 782 is a clear or gray, low VOC emission, heavy bodied, medium setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings, including Schedule 80, with interference fit through 12 inch (315 mm) diameter.
APPLICATION: Weld-On 782 is for use on all types of PVC plastic pipe plumbing applications, including potable water pressure systems, sewer and drain/waste/vent systems. Weld-On 782 has good gap filling properties and is recommended for solvent cementing joints where a sizable gap exists between pipe and fitting _ e.g. large pipe sizes _ and when more working time is required in warm weather..
- Heavy-bodied, medium-setting, low-VOC PVC cement
- Formulated for all classes and schedules with interference fit through 12" (315 mm) diameter (non-pressure applications only up to 18") for plumbing applications
- Good gap-filling properties
- Medium-setting times allow more working time in warm weather
- Available in clear and gray
- Meets ASTM D 2564 Standard
- Meets SCAQMD Rule 1168/316A
- Compliant with LEED (Leadership in Energy and Environmental Design). When using this Weld-On low VOC product, credit can be claimed for LEED Green Building Rating System - Indoor Environmental Quality.
- Listed by NSF International for compliance with ASTM D 2564, NSF/ANSI Standard 14, and NSF/ANSI Standard 61 for use on potable water, drain, waste, vent and sewer applications.
- Listed by IAPMO for compliance with ASTM D 2564 and applicable sections of the latest edition of the Uniform Plumbing Code.