null
close
close

Shopping Cart:

(317) 346-4110
dps-customercare@drainagesolutionsinc.com

Compare (0)
Toggle menu
Account
0 Cart
0
IPS C-65 Qt. Cleaner - Clear
click to zoom in

IPS C-65 Qt. Cleaner - Clear

No reviews yet Write a Review
SKU:
10201
UPC:
012181102015
Availability:
Indiana locations only - Call (317) 346-4110

IPS C-65 Qt. Cleaner - Clear

video gallery

Description

Weld-OnŒ C-65Ž is a clear, low VOC emission, water-thin, solvent cleaner. It is specifically formulated to remove grease, oil and dirt from the bonding surfaces of PVC, CPVC, ABS and Styrene pipe and fittings. It is approved for Flowguard GoldŒ CTS plumbing systems.

APPLICATION: WELD-ON C-65 is an all purpose cleaner and can be used on all sizes, classes and schedules of PVC, CPVC, ABS and Styrene pipe and fittings. It must be used only as a cleaner, in conjunction with the appropriate primer and/or cement combination. WELD-ON C-65 can also be used as a brush cleaner. Detailed directions on making solvent cemented joints are printed on the container label. An installation DVD/CD covering solvent cementing is available. It not only describes the basic principles of solvent cementing, but also covers the handling, storage and use of our products. It is highly recommended that the installer review the instructions supplied by the pipe and fitting manufacturer.

  • Meets SCAQMD Rule 1168/316A.
  • Compliant with LEED ——Œ (Leadership in Energy and Environmental Design). When using this WELD-ON low VOC product, credit can be claimed for LEED Green Building Rating System _ Indoor Environmental Quality.

DIRECTIONS FOR USE:

  • Before using this cleaner, pipe and fittings should be cut square, deburred and checked for proper fit.
  • Use an applicator (e.g. dauber, brush top applicator or paintbrush) at least _ the size of the pipe diameter. Do not use a rag as repeated contact of cleaner-infused rag with skin may cause irritation or blistering.
  • Apply C-65 freely to the socket keeping surface wet and applicator wet and in motion for 5 - 15 seconds. Be sure to use a scrubbing motion to clean off all grease, oil and dirt. Re-dip if necessary. Avoid puddling the socket.
  • Apply C-65 to the pipe surface in the same manner equal to the depth of the socket.
  • Repeat application to the fitting socket.
  • Allow C-65 to dry and then apply appropriate WELD-ON primer and/or cement following instructions on the cans.
Specifications