The Quick4 Plus™ Standard Low Profile septic chamber offers maximum strength through its four center structural columns.

This chamber can be installed in a 36" wide trench. It is shorter in height than Infiltrator’s Standard model chambers to allow for shallow installation. Like the original line of Quick4® chambers, it offers advanced contouring capability with its Contour Swivel Connection™ that permits turns up to 10°, right or left.

ADDITIONAL BENEFITS:
•          Reduces imported fill needed for cap and fill systems
•          Latching mechanism allows for quick installation
•          Four-foot chamber lengths are easy to handle and install
•          Supports wheel loads of 16,000 lbs./axle with 12" of cover
 

The Quick4 Plus All-in-One 8 and Quick4 Plus Endcaps provide increased flexibility in system design and configurations. 

The Quick4 Plus All-In-One 8 Endcap may be used at either end of the chamber row for an inlet/outlet or can be installed mid-trench.

 

The Quick4 Plus endcap offers a simple, flat design and allows installation of a pipe from the end of the chamber rows.

Pick them up at any one of our Indiana stores or see them on our website at:
Chambers and Accessories

PLEASE NOTE: Many installation requirements and options are governed by local codes instituted by the health department in your area.  When in question, check with the local health department for specifics and follow their code instructions.

Providing a simple, reliable, and permanent means for dividing septic tank effluent flow can be a tough problem.
Tuf-Tite Distribution Boxes are a Tough Solution

These boxes are strong, stable, permanent, and non-corrosive. They are injection molded using only premium High-Density Polyethylene which contains no fillers or foam. Tuf-Tite Distribution Boxes are stocked at Drainage Solutions Inc in 4 sizes: 9 Hole, 7 Hole, 6 Hole, and 4 Hole.  Each box comes with a lid and your choice of pipe seals. 

Simple to Install
Simply insert your pipe and push it through the pliable polyethylene Tuf-Tite seal. Pipes fit watertight. You’ll need to signify the pipe type when you order.  That will determine the kind of seals you’ll need.  
Easy to Level
Equalize Distribution Box Flow with Tuf-Tite Speed Levelers. 

Tuf-Tite Speed Levelers™
Here’s how to control the flow of effluent from the Distribution Box: simply insert a Speed Leveler into each outlet pipe. Rotate each Speed Leveler so the flow is distributed as desired. You can then alternate fields or rest failed lines anytime. To stop the flow, simply rotate the Leveler on the appropriate pipe until the Flo-Hole is at the 12 o’clock position.
Tuf-Tite Adapters, Plugs, Risers and Riser Lids are also available.  Pick up your Tuf-Tite D Boxes and accessories at one of our 4 Indiana stores or online at:  https://drainageproducts.us/brands/Tuf%252dTite.html

Now you can say good-bye to ugly wall drains in hardscape projects! Retaining Wall Drains by Champion Landscape Products are designed to conceal unsightly exposed drain pipe in retaining walls – all while permitting optimum egress of water flow.
These beautiful drains are architectural grade, structural retaining components.

For use in large or small residential or commercial settings, the Retaining Wall Drains can also be used as a drain or air vent on barbecue islands, outdoor kitchens, fire pits & more to create a pleasing, continuous wall face.

FEATURES & BENEFITS: 

The Drains are constructed in the USA of durable laser-cut stainless steel with a powder coated faux finish inspired by colors found in natural stone. Lifetime warranty.

They are available in 7 colors & four sizes: 3" x 3”,  4” x 4”,  5" x 5”, and 6" x 6”.
To place your order or get answers to questions, visit or call any of our Indiana stores or view the products on our web store at:
https://drainageproducts.us/brands/CLP.html