Shopping Cart:
Categories
Reed Water Service Tools & Machines
Kit for NPT with hole saws and arbor in storage case
All REED DM3MECH models make branch connections through 3/4” to 4” valves on any appropriately sized mainline for most piping materials. With the right hole saw, these machines connect to chilled and hot water systems up to 300 psi and steam systems up to 15 psi without a shutdown of service This process is known as hot tapping. The machine works for mild steel, galvanized steel, stainless steel, copper, brass and aluminum pipe. Mechanical Hot Tapping Machine drills through the pipe wall via fittings inserted into the service saddle or thread-o-let. The machine eliminates the need to shut down, drain, cut, refit and refill piping systems.
DM3MECH consists of a main body assembly that fits into a 1 ¼” NPT fitting (not provided), along with ½” diameter shafts, hole saws, arbor, coupon retaining drill bit and more.
NOTES:
Other Parts impacted: 93500, 93501, 93502, 93503, 04561
CONTENTS
08350 DM3MECH HOT TAPPING OPERATOR'S MANUAL
08358 COUPON RETAINER 3/8 DIA MAGNET-3 PK
08359 COUPON RETAINER 1/4 DIA MAGNET-3 PK
40149 5/32 ALLEN WRENCH-LONG ARM HEX
40296 HEX WRENCH FOR DMHSA/PPR
04561 DRILL BIT, 1/4" X 4-5/16 LENGTH
99129 DRILL BIT, ¼” COUPON RETAINING
43514 ARBOR
93514 24" SHAFT, 1/2" DIA. W/HOLDER
93515 18" SHAFT, 1/2" DIA. W/SLEEVE
93526 TOOLBOX, PLASTIC
93527 MAIN BODY ASSEMBLY
43500 5/8" DIA. HOLE SAW
43501 7/8" DIA. HOLE SAW
43502 1 1/8" DIA. HOLE SAW
43503 1 3/8" DIA. HOLE SAW
43504 1 3/4" DIA. HOLE SAW
43505 2 1/4" DIA. HOLE SAW
43506 3 1/4" DIA. HOLE SAW
43512 H1 GREASE (3 oz. tube)