Air-over-Hydraulic Pump for use with REED PES8BT
- Air-over-hydraulic pump for use with REED PES8BT Bear Hug™ Squeeze Tool System.
- Pneumatic powered hydraulic pump used to raise and lower the squeeze bars.
- Uses foot pedal control for operator convenience and minimal effort.
- Includes Flow Control Valve for fine squeeze and release speeds.
- Operator to supply applicable air compressor with 20 CFM air flow at 100 psi minimum.
- 12-ft hose allows pump to be placed out of the ditch at ground level.
- ¼” NPT air inlet thread connects air compressor and pump.
- REED recommends use of the PESFRLA filter-regulator-lubricator with the PESAPA pump.
NOTES:
Reed strongly recommends use of the PEGR7 Static Grounding Device (#04621) with PE Squeeze Tools. Use a grounding device as a precaution against static build-up. Dissipate the charge and minimize the possibility of ignition.