Roof Drain Filter Pad 1 1/2" x 21" x 21"

No reviews yet Write a Review
Usually Ships in 24 Hours

Roof Drain Filter Pad 1 1/2" x 21" x 21"


Easy to install roof drain filter keeps debris away from drain to allow water to drain.

Avoid clogged drains and expensive water damage by keeping leaves and large debris away from roof drains. Our economical, easy-to-install Roof Drain Filter holds drain-clogging litter, wind blown leaves and other debris away from the drain strainer but allows high water flow.

Roof Drain Filter installs in minutes, needs minimal upkeep and gives you the confidence that roof drains will keep flowing.

You'll appreciate the ease of installation using common hand tools, cable ties, roofing adhesive or wire. Easily maintain by sweeping top and sides to remove built up sediment and debris.

Features & Benefits

  • Keeps drains free of leaves and debris
  • Porous texture allows high flow rate
  • Exposed overflow reduces ponding
  • Available in a pad or roll
  • Attaches to roof or strainer in minutes
  • Easily maintain by sweeping top and sides to remove debris


  1. Remove sediment and debris around drain.
  2. Verify size allows at least 3” of filter from outer edge of strainer.
  3. To ensure a snug fit, cut two slits on net side to make an X-shaped opening the size of the strainer.
  4. Slide Filter over strainer, net side down.
  5. Trim off excess material around strainer.


  • Sweep top and sides of Roof Drain Filter to remove debris
  • Remove debris from roof

  • Check semi-annually and clean or replace

Box Includes:

  • 1 Roof Drain Filter Pad - 1 1/2" x 21" x 21"