Reed Groovers, Power Drives Threaders & Dies

2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

1 1/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1 1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

3/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

3/8" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/4" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

The REED adjustable guide system and solid block dies make these the most economical, most convenient, and most versatile threader sets on the market.   Further, with two pawls, handle swing is faster on the adjustable guide threader...

Enclosed dropheads for NPT can be used manually or with the REED 601PD Power Drive.  Low-cost, disposable, compact yet high-quality dies. Separate replacement die segments are not available for these disposable,...

Enclosed dropheads for NPT can be used manually or with the REED 601PD Power Drive.  Low-cost, disposable, compact yet high-quality dies. Separate replacement die segments are not available for these disposable,...

Enclosed dropheads for NPT can be used manually or with the REED 601PD Power Drive.  Low-cost, disposable, compact yet high-quality dies. Separate replacement die segments are not available for these disposable,...