
The REED UPC is lightweight; cuts fast; requires only 12” clearance around the pipe; provides a square cut virtually every time; and can be operated underwater. It is by far the safest, easiest and fastest power cutter to setup, operate and maintain, which nets a low operating cost.
Both UPC836APE and UPC848APE kits ship in a steel toolbox and include a UPC cutter, a filter-regulator-lubricator, #97520 and #97521 blades. The #97521 blade will cut large diameter PE pipe with a wall thickness up to 2.65” (67 mm). To cut 6” - 8” PE pipe, the #97519 blade must be ordered separately.
Use Reed's Blade Chart for guidance.
STANDARD EQUIPMENT
UNIVERSAL PIPE CUTTER POWER REQUIREMENTS
NOTE: Universal Pipe Cutters must ship via truck freight.
NOTE: When cutting steel pipe with the steel blades, sparks are possible and expected. Because of the sparks, the UPC cannot be used for cold cuts.
Nam tempus turpis at metus scelerisque placerat nulla deumantos solicitud felis. Pellentesque diam dolor, elementum etos lobortis des mollis ut risus. Sedcus faucibus an sullamcorper mattis drostique des commodo pharetras loremos.