Cut-Off Blade for PVC for PLAS In-Line Rotary Cutter Cut-off blade for PLAS models used on PVC pipe. Carbide-tipped blade withstands abrasive PVC. To avoid breaking tip of blade, turn tool only in direction indicated on PLAS cutter.

Cut-Off Blade for PE for PLAS In-Line Rotary Cutter Cut-off blade for PLAS models used on PE pipe. Made from tool steel for long blade life. Blade tip designed to drive out chips. Reed PLAS In-Line Rotary Pipe Cutter Blade for...

Bevel Blade for PVC and PE Pipe for PLAS In-Line Rotary Cutter WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.   

PLAS In-Line Rotary™ Cutters are excellent for cutting PVC pipe in trench or above ground.  PLAS In-Line Rotary Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line Rotary™ Pipe Cutter Blades. Pipe...

Paver Drain A/T is a dual-elevation deck drain system with an Aluminum top cap used for the installation of paver decks. This unique design features a top cap that can be lapped past the joints for rigidity as well as a tray built into the base to set...

The Flush Mount Paver Drain is a dual-elevation deck drain system used for the installation of paver decks. This design features a top cap that can be lapped through the sectional base insuring a rigid configuration. The bottom tray of the base section...

The Flush Mount Paver Drain is a dual-elevation deck drain system used for the installation of paver decks. This design features a top cap that can be lapped through the sectional base insuring a rigid configuration. The bottom tray of the base...

The Flush Mount Paver Drain is a dual-elevation deck drain system used for the installation of paver decks. This design features a top cap that can be lapped through the sectional base insuring a rigid configuration. The bottom tray of the base...

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion. Fits 2” IPS DR11 .216 Wall Mandrel #98660 Removes .009” - .012” peel thickness. Spring actuated...

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion. Fits 1 1/4” CTS SDR11 .121 Wall Mandrel #98669 Removes .009” - .012” peel thickness. Spring actuated...

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion. Fits 1 1/4” IPS DR11 .151 Wall Mandrel #98664 Removes .009” - .012” peel thickness. Spring actuated...

The True Peel® PE Prep Tool removes dirt and oxidation from the outside diameter of the pipe in preparation for electrofusion. Fits 1-1/4” IPS DR10 .166 Wall Mandrel #98672 Removes .009” - .012” peel thickness. Spring actuated...