Reed Manufacturing

Adapts Milwaukee® die grinder Model 2784-20 or 2784-22 to serve as REED Portable Pipe Beveler Kit includes: CPBMADP Milwaukee® Beveler Adapter & RBIT1 Router Bit 1/8" - 5/8" Adapt operator's own Milwaukee® die...

PDEB250B - Replacement Blades for PDEB250 Cone Chamfer Tool Blade with bevel edge for best performance fits REED PDEB250 deburring tool. Pack of two allows user to replace both blades at one time.

2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

1 1/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1 1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid block...

3/4" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/2" Block Die to be used with Threaders SD84, S84 or 84. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

3/8" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

1/4" Block Die to be used with Threaders SD81, S81, 81 or 71D. Only REED solid block dies have wide throats and extra-fine threads that actually pull the die onto the pipe, even if the burr is large. CNC-milled from solid tool steel, solid...

The REED adjustable guide system and solid block dies make these the most economical, most convenient, and most versatile threader sets on the market.   Further, with two pawls, handle swing is faster on the adjustable guide threader...

Enclosed dropheads for NPT can be used manually or with the REED 601PD Power Drive.  Low-cost, disposable, compact yet high-quality dies. Separate replacement die segments are not available for these disposable,...