Tools

8" Saddle for use with PPJ Plastic Pipe Joiner to make solvent connection. Capacity O.D.: 8.625" Saddles balance the PPJ beam and assist in pulling the two pieces of pipe together. Pipe saddles are sold by the pair; one for each piece of pipe. For...

Plastic Pipe Joiner Fitting Attachment for Solvent Cement Connection. NOTE: PPJ Plastic Pipe Joiner Base Unit & Connection saddles must be purchased separately. Efficiently connect 4” – 12” (114 - 324 mm) PVC solvent cement...

Plastic Pipe Joiner Saddles for Gasketed Pipe (one pair) Easily join or separate gasketed 4”-16” (114 – 434 mm) PVC pipe using the PPJ and PPJVS universal saddles. V-shape saddle serves as a guide for pipe and fits a wide range...

Plastic Pipe Joiner Base Unit.    Application: Gasketed Pipe or Solvent Cement Connection NOTE: Connection saddles for gasketed pipe (PPJVS) or solvent cement connections (Plastic Pipe Joiners – Saddles) must be purchased...

Filter-Regulator-Lubricator for Bear Hug™ PE Squeeze Tool System ¼” NPT hose connection 100 psi Maximize tool efficiency by using clean air. Protect pneumatic motors from contamination by using an FRL. NOTES: Reed strongly...

Replacement blade for REED HPC12 guillotine pipe cutter. Expect high quality cuts from this durable, non-stick coated, heat-treated, tool steel blade. Best performance when the tool and the pipe are kept clean and the blade edge is free of nicks...

Replacement blade for REED HPC8 guillotine pipe cutter. Expect high quality cuts from this durable, non-stick coated, heat-treated, tool steel blade. Best performance when the tool and the pipe are kept clean and the blade edge is free of nicks...

Replacement blade for REED HPC4 guillotine pipe cutter. Expect high quality cuts from this durable, non-stick coated, heat-treated, tool steel blade. Best performance when the tool and the pipe are kept clean and the blade edge is free of nicks...

Robust Guillotine Pipe Cutters are designed to cut PE pipe from SDR15.5 to SDR9 within 1/8” (3 mm) of square on medium and high-density pipe. Manual, guillotine style cutter slices smoothly through PE. All aluminum construction results in...

Static grounding devices provide a path to ground for any static charge. Because static can build up on plastic pipe, even for water services, there is a possibility of a spark discharge of sufficient energy to cause ignition if the proper air/gas...

Robust Guillotine Pipe Cutters are designed to cut PE pipe from SDR15.5 to SDR9. Cuts PE up to 4" (125 mm). New all aluminum construction results in lighter weight and greater rigidity Greater capacity, up to 4.9 in O.D.   Slightly...

PLAS Hand-over-Hand Rotary™ Cutters are excellent for cutting PE / HDPE pipe in trench or above ground.  PLAS Hand-over-Hand Rotary™ Cutters can retrofit from PVC to PE or vice versa with alternative PLAS In-Line...